How To Take Dental Impressions.

How To Take Dental Impressions

You’ve now received your Beam impression kit and you’re on your way to achieving your dream smile. We’ll now teach you how to take your dental impressions at home.

What You’ll Receive In Your Beam Impression Kit

4 x Impression trays

Smile stretcher

4 x sets of putty (4 blue and 4 white)

Gloves

Easy to read instructions

Pre-paid return shipping label

What You’ll Receive In Your Beam Impression Kit

4 x Impression trays

Smile stretcher

Gloves

4 x sets of putty (4 blue and 4 white)

Easy to read instructions

Pre-paid return shipping label

What makes a good impression?

UPPER ARCH

LOWER ARCH

What To Avoid

Gumline and teeth not fully captured. Caused by insufficient putty.

The molars cannot be seen. The impression is not deep enough.

Drag marks with teeth & gumline not visible. Caused by lack of pressing.

Teeth are not close enough to the front of the tray.

How To Take Your Dental Impression

01

Brush Teeth, Then Floss

Brush your teeth for approximately 2 minutes and then floss to help remove any food or plaque that may be stuck.

02

Wash Hands

Wash your hands with water and soap.

03

Take Photos Of Your Teeth With The Smile Stretcher

Insert the smile stretcher and take the following photos of your teeth: Lover Arch, Upper Arch, Open Smile, Closed Bite Smile, Natural Smile

04

Wear Gloves And Take Out Your Trays And Putty

Brush your teeth for approximately 2 minutes and then floss to help remove any food or plaque that may be stuck.

05

Mix Putty

Mix together 1 blue and 1 white putty to make a combined colour. When you start mixing, mix quickly! The mixture will set after about 60 seconds and it becomes too solid to take impressions. Therefore, get the putty onto a tray as soon as possible.

06

Place Putty Into The Upper Impression Tray

Roll the solid colour putty mix between your hands to create an even cylinder around 10cm long. Place the putty roll into the upper tray, making sure to fill the entire tray evenly.

07

Take Your Upper Impression

Place the tray in your mouth and push it up onto your teeth with a normal amount of force (not too hard but not too short). Hold the tray with your thumbs and make sure it doesn’t move while making your impression. Bite down gently until a light amount of contact is made with the putty. Set your timer and wait 3 and a half minutes. Make sure not to drag the tray when removing it as this can lead to double indentation. The optimal method for the upper tray is to pull down and then pull out and for lower tray to pull up then pull out.

08

Take Your Lower Impression

Repeat steps 5 to 7 for the lower tray.

09

Send Photos To Beam For Review

Before starting your next set of impressions, take photos of the two impressions you’ve completed (1 x upper and 1 x lower) and send them to us at hello@trybeam.com.au.
We`ll let you know if there`s anything you need to change for your second ser and answer any of your questions. Once you`ve heard back from us you can then proceed with taking impressions for the next set of trays.

10

Repeat The Process For The Next Impressions!

Repeat steps 4 to 8 for your second set.

11

Ship Your Impressions To Beam

Insert the completed impressions and trays into the plastic bag provided. This will ensure they remain in good condition for their journey back to our dental lab. Then place the plasitc bag in the prepaid satchel provided. Remove the tracking sticker on the satchel and keep for your reference in case there are any delivery issues. Send all 4 impressions back to Beam.

You`re now on your way to achieving your dream smile.

Direct to you

01

Brush Teeth, Then Floss

Brush your teeth for approximately 2 minutes and then floss to help remove any food or plaque that may be stuck.

02

Wash Hands

Wash your hands with water and soap.

03

Take Photos Of Your Teeth With The Smile Stretcher

Insert the smile stretcher and take the following photos of your teeth: Lover Arch, Upper Arch, Open Smile, Closed Bite Smile, Natural Smile

04

Wear Gloves And Take Out Your Trays And Putty

Brush your teeth for approximately 2 minutes and then floss to help remove any food or plaque that may be stuck.

05

Mix Putty

Mix together 1 blue and 1 white putty to make a combined colour. When you start mixing, mix quickly! The mixture will set after about 60 seconds and it becomes too solid to take impressions. Therefore, get the putty onto a tray as soon as possible.

06

Place Putty Into The Upper Impression Tray

Roll the solid colour putty mix between your hands to create an even cylinder around 10cm long. Place the putty roll into the upper tray, making sure to fill the entire tray evenly.

07

Take Your Upper Impression

Place the tray in your mouth and push it up onto your teeth with a normal amount of force (not too hard but not too short). Hold the tray with your thumbs and make sure it doesn’t move while making your impression. Bite down gently until a light amount of contact is made with the putty. Set your timer and wait 3 and a half minutes. Make sure not to drag the tray when removing it as this can lead to double indentation. The optimal method for the upper tray is to pull down and then pull out and for lower tray to pull up then pull out.

08

Take Your Lower Impression

Repeat steps 5 to 7 for the lower tray.

09

Send Photos To Beam For Review

Before starting your next set of impressions, take photos of the two impressions your completed (1 x upper and 1 x lower) and send them to us at hello@trybeam.com.au.
We`ll let you know if there`s anything you need to change for your second ser and answer any of your questions. Once you`ve heard back from us you can then proceed with taking impressions for the next set of trays.

10

Repeat The Process For The Next Impressions!

Repeat steps 4 to 8 for your second set.

11

Ship Your Impressions To Beam

Insert the completed impressions and trays into the plastic bag provided. This will ensure they remain in good condition for their journey back to our dental lab. Then place the plasitc bag in the prepaid satchel provided. Remove the tracking sticker on the satchel and keep for your reference in case there are any delivery issues. Send all 4 impressions back to Beam.

You`re now on your way to achieving your dream smile.